軋機的輥系在換輥前可以預安裝并調整好，軋機停車后只需較短時間即可換上新輥系。而新輥系經少量試軋后即能軋出合格產品。因此這種軋機可調性能好，成材率高。

短應力線軋機可制成二輥式、三輥式或四輥式多種形式的軋機。在型鋼、線材和板帶鋼生產中部有應用。

The roll system of rolling mill can be pre installed and adjusted before changing the roll. After the rolling mill , it only needs a short time to replace the new roll system. The new roll system can be rolled out of the qualified product after a small amount of test rolling. Therefore, this kind of rolling mill has good adjustable performance and high yield.  

The short stress line mill can be made into two - roll, three - roll, or four - roll type rolling mills. It is applied in the middle part of steel, wire and strip steel.

短應力線軋機有什么特點？

短應力線軋機具有體積小、重量輕、軋機剛度大、軸承使用壽命長等優點。近年來該軋機在小型軋機上使用越來越廣泛。隨著短應力線軋機在線快速換輥裝置的出現，使軋機投資減少，導致其應用將會更普遍。

What are the characteristics of a short stress line mill?  

Short stress line mill has the advantages of small volume, light weight, large rigidity of rolling mill and long service life of bearing. In recent years, the rolling mill has been used more and more widely in small rolling mill. With the emergence of on-line fast roll change device for short stress line rolling mill, the investment of rolling mill is reduced, and its application will be more common.

輥式軋機生產率可以很高，有的可達到2000-4000 件/小時甚至更高，易于實現自動化生產?？傊?，輥式軋機適用于對產品精度要求不高，且同時軋制一個或幾個零件的情況。輥式軋機是三種類型中運用多的一種。Therodisdrivenbythemoldtomakethereverserotationmovementwiththemold。圓弧式軋機適用于大批量的為以后鍛造供坯的生產情況。

The productivity of the roller mill can be very high, some can reach 2000-4000 pieces / hour or even higher, and it is easy to realize automatic production. In conclusion, the roll mill is suitable for the low accuracy of products and rolling one or several parts at the same time. Roll mill is the most widely used in three types. The circular arc mill is suitable for large quantities of production for forging later.

六輥軋機，軋機專業廠家介紹，這種軋機的輥系相對來說比較穩定，而且其主要是由一對工作輥和兩對支承輥組成。不過，其在操作上有著諸多不便，因此應用并不廣泛，通常是用于軋制海底電纜的銅帶。

Six-high mill, rolling mill professional manufacturers that the roll system of this mill is relatively stable, and it mainly cists of a pair of work rolls and two pairs of backup rolls. However, it has many inconveniences in operation, so it is not widely used, usually used for rolling high-precision submarine cable copper strip.