H型鋼在冷床上直立冷卻后，由輥道送至變節距輥式矯直機進行長尺矯直，經成排臺架成排后，由冷鋸機切成6～24m定尺。切成定尺的軋件經人工目測檢查后，進入堆垛臺架堆垛，經打捆、稱重、標牌后進入成品臺架，由成品跨吊車吊運入庫、發貨。

H type steel upright in the cooling bed after cooling by roller to pitch roller straightening machine straightening ruler, the rows of bench rows, a cold sawing machine into 6 ~ 24m length. The rolled pieces, which are cut into fixed lengths, are inspected and inspected after manual inspection. They enter stacks stacking, and then enter the finished rack by bundling, weighing and sign.

開口式機架由機架底座和上橫梁組成。

開口式機架是型鋼車間常見的一種機架形式。這種機架的優點是制造簡單，裝卸、換輥方便。其缺點是強度和剛度較低，軋輥輥跳值較大，影響產品精度，故只適用于大型軋機。

The open frame is of the frame base and the upper cross beam.  

The open frame is one of the most common forms in the steel workshop. The advantages of this frame are simple manufacturing, loading and unloading, and convenient for roll change. Its disadvantage is that its strength and stiffness are low, the roll roll value is larger and the precision of the product is affected, so it is only suitable for large rolling mill.

軋機專業廠家說，熱軋機的優點主要可以歸納為三個方面。一點，采用熱軋可以明顯的減少能耗，降低成本。此外，熱軋時可以發揮出較高的金屬塑性，而且所產生的變形抗力較小，能夠有效的防止金屬出現嚴重的變形問題。

The mill manufacturer explains that the advantages of the hot rolling mill can be summed up in three aspects. First, the use of hot rolling can significantly reduce energy cumption and reduce costs. In addition, hot rolling can give full play to the high metal plasticity, and the deformation resistance is small, which can effectively prevent the serious deformation of the metal.