楔橫軋機類型有輥式、板式和單輥弧式楔橫軋機。三種類型的楔橫軋機相比，板式楔橫軋機模具制造較為簡單，模具的調整比較容易，因而軋件的精度較高，并且工藝可靠.

The cross wedge rolling mill has roller type, plate type and single roll arc cross wedge rolling mill. Compared with the three types of cross wedge rolling mill, the mould manufacturing of the plate type cross wedge rolling mill is simpler and the adjustment of the die is easy, so the precision of the workpiece is high and the process is reliable.

使用熱軋的第二個優點就在于其可以適當?shù)母纳平饘僖约昂辖鸩牧系募庸すに囆阅?。也就是說，其可以把較大的晶粒進行破碎，同時可以減少裂紋的出現，這樣一來，也就相當于減少了鑄造過程中的缺陷問題，提高合金的加工性能。

The second advantage of hot rolling is that it can appropriately improve the processing performance of metal and alloy materials. That is to say, it can break the larger grain and reduce the appearance of the crack, which is equivalent to reducing the defects in the casting process and improving the processing performance of the alloy.

還有三輥軋機，軋機專業廠家介紹，這種軋機由于本身的優勢并不突出，所以使用的比較少。輥式軋機生產率可以很高，有的可達到2000-4000件/小時甚至更高，易于實現自動化生產。那么，四輥軋機具有怎樣的特點恩？這種類型的軋機的工作輥直徑較小，傳遞軋制力矩，軋延壓力由直徑較大的支承輥承受。其的優點在于相對剛度高、壓下量大、軋延力小，比較適合軋制較薄的板材。

There are three-high mill, mill professional manufacturers , this kind of mill because of its advantages are not prominent, so the use of less. So, what are the characteristics of the four high rolling mill?驅動電機斜置在鋸機底座上，通過傘齒輪及主傳動軸帶動鋸片，鋸片由液壓裝置鎖緊在傳動軸上。 The working roll diameter of this type of mill is smaller, the rolling torque is transmitted, and the rolling pressure is borne by the backup roll with larger diameter. Its advantages are high relative stiffness, large reduction and small rolling force, so it is suitable for rolling thin sheets.

六輥軋機，軋機專業廠家介紹，這種軋機的輥系相對來說比較穩定，而且其主要是由一對工作輥和兩對支承輥組成。不過，其在操作上有著諸多不便，因此應用并不廣泛，通常是用于軋制海底電纜的銅帶。

Six-high mill, rolling mill professional manufacturers that the roll system of this mill is relatively stable, and it mainly cists of a pair of work rolls and two pairs of backup rolls. However, it has many inconveniences in operation, so it is not widely used, usually used for rolling high-precision submarine cable copper strip.