我們聊聊在機械設計中，我們必須掌握的有關軸轂聯接的知識！軸轂聯接是軸轂與軸相連接的軸上零件，常見齒輪、帶輪等。聯接使回轉零件在軸上定位和固定，以便傳遞運動和動力。

We talk about the mechanical design, we must master the knowledge about the shaft hub connection. Shaft hub connection is the axle hub and shaft connected to the shaft parts, common gear, belt wheel, and so on. The connection enables the rotating parts to be  and fixed on the axis to transmit motion and power.

鍵是一種標準件，通常用于聯接軸與軸上旋轉零件與擺動零件，起周向固定零件的作用以傳遞旋轉運動和扭矩，楔鍵還可以起單向軸向固定零件。而導鍵、滑鍵、花鍵還可用作軸上移動的導向裝置。 根據鍵的結構形式，鍵聯接可分為平鍵聯接、半圓鍵聯接、楔鍵聯接和切向鍵聯接等幾類。

The key is a standard part, which is usually used to connect the rotating parts and swing parts of the shaft and the axle to move the fixed parts to transmit rotary motion and torque, and the wedge key can also play a one-way axial fixation part. The guide, slippery key and the spline can also be used as a guiding device for moving on the axis. According to the structure of the key, key joins can be divided into a flat bond, a semicircle bond, a wedge bond and a tangent bond.

型面聯接：是利用非圓剖面的軸與相應形狀的零件的轂孔配合而構成的聯接，作為機械傳動中的聯接方式，型面聯接相對于傳統的鍵聯接相比，具有聯接強度高，沒有應力集中，可以傳遞大扭矩且的同時也可以承受沖擊載荷，并且對于一些大型機械裝備來講其拆裝方便及維修便利。

is the hub hole type surface connection: the non-circular section axis and the corresponding shape parts with a connection, as the connection mode in mechanical transmission, compared with the traditional linkage type surface connection compared with connecting strength, no stress , can  large torque and high efficiency at the same time it can withstand the impact load, and for some large mechanical equipment for its disassembly and convenient maintenance.

螺旋副的間隙大，旋轉時費力，使用中穩定性差。機用虎鉗開合行程大，螺旋副的運行長度較長，為保證能夠快速裝夾，（金屬加工真不錯）機用虎鉗螺旋副的螺距較大。較大的螺距意味著較大的螺旋升角，轉動單圈進給量較大，使用時較費力；較大的螺距需要更大的配合間隙來確保螺旋副的正常使用。

The clearance of the helix pair is large, the rotation is hard and the stability of the use is poor. The machine has large opening and closing stroke, and the operation length of the screw pair is longer. In order to ensure quick clamping, metal machining is good. Larger pitch means larger spiral angle, larger single turn feed and more laborious use. Larger pitch needs more fit clearance to ensure the normal use of screw pair.