輥道是軋鋼車間運送軋件的主要設備，其重量占整個軋鋼車間設備總重量的40%左右，是軋鋼車間中使用多的設備。軋件進出加熱爐，在軋機上往復軋制及軋后輸送到精整工序等工作均由輥道來完成。

Roller table is the main equipment for rolling parts in rolling workshop. Its weight accounts for about 40% of the total weight of the whole rolling workshop. It is the most used equipment in rolling workshop. Rolling in and out of the heating furnace, the rolling mill on the rolling mill and after rolling to the finishing process and other work are completed by the roller.

為使鑄坯平穩迅速地運送，有時將這個區的輥道設計成可升降的。輥道按驅動方式可分為集中傳動輥道和單獨傳動輥道兩種。集中傳動輥道由一臺電機帶動一組輥?zhàn)?，通過電機一減速機一鏈輪傳動，或者通過電機一減速機～長軸一傘齒輪傳動方式傳動。

In order to deliver the billet smoothly and quickly, the roller table in this area is sometimes designed to be lifted and lifted. The roller table can be divided into two types: the  drive roller and the separate drive roller. The  driven roller table is driven by a motor to a set of rollers, driven by a motor, a reducer or a sprocket, or through a motor, a reducer, a long shaft and a bevel gear transmission mode.

雙層滾筒輸送機同樣也具備了滾筒的優點。具有輸送量大，維護方便等原因。應用于各行業的成品包裝箱、周轉箱等輸送。要求被輸送物的底部是平整的。而且每三只滾筒要與底部接觸。

Double drum conveyor also has the advantages of drum. It has a large amount of transportation, convenient maintenance and so on. It is applied to the transportation of finished packing boxes and turnover boxes in various industries. The bottom of the conveyer is required to be flat. And every three rollers should be in contact with the bottom.

輸送機配件托輥是皮帶輸送機當中一種較為簡單卻又占有大比例的重要輸送零件，托輥在皮帶輸送機當中的主要作用支撐輸送帶和物料的重量。

Conveyor accessories roller is an important part of the belt conveyer which is relatively simple but occupies a large proportion. The main function of the roller in the belt conveyer supports the weight of the conveyer belt and the material.