上軋輥為液壓式平衡裝置，電動壓下，壓下量480mm，壓下速度60mm／s，正常軋制時下輥固定，上輥壓下。換品種和使用較小直徑的軋輥時，下軋輥用墊片組調節其水平度.

The upper roller is the hydraulic balance device, the electric press down, the press down 480mm, the down speed 60mm / s, the normal rolling roll fixed and the upper roller. When changing varieties and using smaller diameter rolls, the lower roll can be adjusted by the gasket group.

四棍軋機的工作輥直徑較小，傳遞軋制力矩，軋延壓力由直徑較大的支承輥承受。這類設備的主要優點是相對剛度較大，壓下量大、軋延力小，可軋制較薄的板材，也包括有可逆和連軋兩種。

The working roll diameter of the four bar mill is small, and the rolling torque is transferred. The rolling pressure is borne by the backup roller with larger diameter. The main advantages of this type of equipment are relatively large stiffness, large reduction, low rolling force, thin rolled sheets, and reversible and continuous rolling two.

軋機專業廠家說，熱軋機的優點主要可以歸納為三個方面。一點，采用熱軋可以明顯的減少能耗，降低成本。此外，熱軋時可以發揮出較高的金屬塑性，而且所產生的變形抗力較小，能夠有效的防止金屬出現嚴重的變形問題。

The mill manufacturer explains that the advantages of the hot rolling mill can be summed up in three aspects. First, the use of hot rolling can significantly reduce energy cumption and reduce costs. In addition, hot rolling can give full play to the high metal plasticity, and the deformation resistance is small, which can effectively prevent the serious deformation of the metal.